§ 16.08.030. Plats and data

The final plat for submission to the common council for approval shall contain the following data and be subject to the following requirements:

A. Final plat shall be drafted in ink and presented on a reproducible linen or mylar, and shall be at a scale of one hundred (100) feet to one inch or larger. The final plat shall show the following:

1. Primary control points, approved by the city engineer or city superintendent, or descriptions and ties to such control points, to which all dimensions, angles, bearings, and similar data on the plat shall be referred;

2. Tract boundary lines, right-of-way lines of streets, easements and other rights-of-way, and property lines of residential lots and other sites; with accurate dimension to the nearest one-tenth of a foot, bearings or deflection angle to the nearest minute, and radii, arcs, and central angles of all curves;

3. Name and right-of-way width of each street or other right-of-way;

4. Location, dimensions and purpose of any easements;

5. Number to identify each lot or site;

6. Purpose for which sites, other than residential lots, are dedicated or reserved;

7. Minimum building setback line on all lots and other sites;

8. Location and description of monuments;

9. Certification of title showing that applicant is the land owner;

10. Certification by registered land surveyor certifying to accuracy of survey and plat;

11. Statement by owner dedicating streets, rights-of-way and any sites for public uses;

12. Title, graphic scale, north arrow and date.

B. Cross sections and profiles of streets showing grades approved by the city engineer or city superintendent. The profiles shall he drawn to city standard scales and elevations and shall be based on a datum plane approved by the city engineer or city superintendent.

C. Protective covenants in form for recording.

(Prior code § XV-131-20)